Quiet 150mm Through Wall Bathroom/Kitchen Fan Kit with Humidity Control


Quiet 150mm Through Wall Bathroom/Kitchen Fan Kit with Humidity Control

Price (inc. GST)

Add to Favourites


The new high-pressure and energy-efficient QUIET fan kits have ultra-high airflow without nuisance noise and are designed to be ducted straight through a bathroom or kitchen exterior wall.

Humidity Control

An integral humidity controller automatically switches the fan ON when it senses a significant rapid rise in humidity that may have been triggered by a shower/bath event. The fan will stop immediately if the event is not confirmed. If the event is confirmed, then either the preset top speed, or a lower speed, will be determined as the better option for clearing the humidity created by the shower/bath event and the fan will ramp up to, and run at, that speed. After sensing that the shower/bath event has ended, the fan will continue running for a period of time, as determined by the humidity controller, as needed to clear the room of any residual humidity.


  • 150mm Quiet Axial Fan Kit - Through Wall
  • Square Fascia, Standard Profile, Humidity Condition Switching
  • Humidity Control - Suitable for high steam areas.
  • All kits include a weatherproof cowl.
  • 5 year warranty.
  • Low operating sound levels.
  • Stylish fascia designed to blend into any decor.
  • Meets current kitchen or laundry NZBC G4/AS1 and Healthy Homes requirements.
  • 22W, 138 Pa, 114 l/s, 410 m3/hr, 0.19 W/l/s, 41 dB(A)

For best results, Simx recommend this product for bathrooms and kitchens. In kitchen installations, do not install the fan kit, laterally, any closer than 2m from the cooktop. In bathroom installations the fan kit can be installed within 1.5m, laterally, of the steam source and immediately above the bath or shower tray up to the higher of either 2.25m or the height of the fixed plumbing connection. Once installed, following these instructions, this product will meet the Healthy Homes Standard for through wall, or ceiling, mount installations in rental property bathrooms or kitchens. This product will also comply with the G4 Building Code for through wall mount installations in bathrooms and kitchens.

With Humidity Control

More information and BPIR (if applicable) can be found on the Manrose website. View website »