Neo Inbuilt Gas Fire ETR

Product code: RIB2311ETR

Priced From



Please note: For off shore island or international purchases you will need to create a 'Quote List' or simply contact any store and our friendly team will assist you.

Designed with versatility in mind. It can be placed in renovations or new builds.

Electronic model.

Includes ETR engine. Frame is ordered separately. 

The Rinnai Neo gas fire range combines modern good looks with the latest advances in technology. Impressively it's the first natural draft gas fire available in New Zealand with a greater than 4-star energy rating across all installations.

The ENERGY STAR® mark identifies New Zealand's most efficient products and appliances.


A major benefit of the Neo's 4.1 star rating is that it won't burn a hole in your pocket. With Neo's advanced design, you'll require less energy to heat your room - €”which means lower running costs.


A choice of designer framing options are available, so you can individualise your fireplace to complement your decor.


Choose from a base model with a discrete manual control or a full featured model with Electronic Timer Remote (ETR). 

Suitable for :  Living rooms and open plan areas. Heating area 69-107 m² (depending on gas type and where you live in NZ).

  • LPG up to 93 m²
  • NG up to 107 m²

Gas type : Available for Natural Gas or LPG. Specify gas type at time of purchase.

Input: 14-30 MJ/h 14-27 MJ/h
Output: 3.24-6.94 kW 2.98-6.04 kW
Efficiency: 80.5% 80%
Heating Area: up to 107 m² up to 93 m²
Data plate Inside the appliance on the front left hand side
Flue: decorative(mock chimney) Natural draft twin-skin flue. An approved 100 mm cowl must be fitted to all installations. Decorative chimney installations require a Rinnai Zero Clearance Box and Flue Kit. Flue dimensions; outer 150 mm, inner 100 mm.
Flue: masonry Rinnai strongly recommends the use of a Rinnai flexiliner flue system (flexi 100 mm). Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissible as long as the chimney is checked for soundness and ability to achieve a good draw.
Gas connection ½" BSPT, the gas supply terminates inside the heater at the front lower right hand side of the appliance.
Ignition Continuous spark electronic ignition
Noise level 37-45 dB(A)
Power consumption High 50 W, standby
Safety devices Overheat switch, electrical fuse, flame failure sensing system, and power failure protection.
Weight 60 kg
Market release 2011
Compliance ES: Supplier Declaration of Compliance
Declaration Number: 123912011
Certificate Number: 7707
  Masonry (mm) Mock Chimney (mm)
A 865 mm 865 mm
B 660 mm 660 mm
C 359 mm 363 mm
D 62 mm 62 mm
E 691 mm 795 mm
F 589 mm 650 mm
G - 280 mm
H 305 mm 305 mm
I 45 mm 45 mm
J 235 mm 240 mm

This is considered a flush installation, only the frame protrudes from the enclosure (sits out approximately 20mm from the wall). 

Installation Manual Download
Operation Manual Download
Spares Download
RIB2311 Log Location Guide Download
RIB2311 Spares Download
Zero Clearance Assembly Download
Neo Inbuilt Gas Fire ETR