Premier Solar Electric Boosted 3 Collectors - External

$12,195.00
Qty:  Enquire
   - OR -   

Model: A591270/3T

Rheem Premier Solar is an indirect solar water heater specifically designed for a wide range of environments and suitable for most water qualities. Slim line collectors are mounted on the roof while the 270 litre solar hot water storage cylinder is located at ground level indoors or outdoors.

The system combines revolutionary drain back heat exchange technology in a durable vitreous enamel lined mains pressure cylinder. The fully integrated system of solar hot water cylinder, electronic controls and sensing of the collectors ensures the available energy is used in the most effective way.

Combined with Rheem high efficiency multi riser collectors, this system can cut water heating energy consumption by up to 70%. Overall, this means lower costs and a reduced carbon footprint whilst cutting Greenhouse gas emissions (GCE's).

 

  • 1 x 270 Litre Cylinder with central heat exchanger , “Drain Back” reservoir and 3 kW electric booster element (cylinder can be internally or externally mounted)
  • Pump and Controller mounted at base of cylinder factory set for optimum performance
  • Heat Exchanger is pre charged with heating fluid (top up may be necessary following commissioning)
  • 3 x high performance glazed flat panel solar collectors
  • Collector mounting kit for roof of correct inclination (for flat roofs a stand can be purchased separately)
  • Cut hot water heating costs by up to 70%
  • Drain Back protection
  • Option of electric or gas boosting
  • Over heat protection built-in
  • Storage cylinder can be installed indoors or outside your home

 

MODEL NUMBER CYLINDER LOCATION COLLECTOR LOCATION BOOST OPTION # PEOPLE
         
A591270/3T Indoor/Outdoor Roof Mounted Electric Moderate Climate 1-3 Cold Climate 1-3

 

PERFORMANCE    
>Storage capacity L 270
>No of people (Moderate Climate) 1 - 3
>No of people (Cold climate) 1 - 3
Cylinder dimensions mm H1755 x W650 x D680
Roof space required    
> 2 collectors m  
>3 collectors m 3.6m x 2.0m
Weight empty - cylinder kg 147
Weight empty - collector kg 48
TPR valve setting kPa 1000
Min. supply pressure kPa N/A
Water connections    
>Inlet BSPF 3/4 /20
>Outlet BSPF 3/4 /20
>Gas BSPM N/A
>Solar flow & return BSPM 1/2 /15
Boost capacity    
>Electric kW 3.6 - 135
>Gas MJ N/A

 

Downloads
Solar Fact Sheet
User Guide and Installation Instructions

Plumbing Plus © 2013